Why does my lawn mower stall?

It runs good for about 45 minutes then sputters a little then sputters more often over a period of the next 15 minutes then stops running. It won't restart until it cools down.

7 Answers

Relevance
  • M.
    Lv 7
    1 year ago

    Probably a plugged filter or screen in the gas tank.

    • Commenter avatarLog in to reply to the answers
  • Paul
    Lv 6
    1 year ago

    Also clean the gas filter. It may be in the carb inlet or the gas tank outlet, or in the gas tank itself. You could try giving it a little extra gas when it starts to die either by choking it a bit or squeezing the primer bulb, if you have one. If it improves then you will know it's a gas supply problem

    • Commenter avatarLog in to reply to the answers
  • 1 year ago

    And then it could be a bad coil. I have a chipper shredder that from day one wouldn't restart when it was hot from running until it had set for a couple of hours. Kept getting worse until it finally wouldn't start at all and found a bad coil and rplaced it. Now it starts every time, cold or hot.

    • Commenter avatarLog in to reply to the answers
  • 1 year ago

    It's obviously overheating, and so a filter somewhere is blocked, or you haven't any oil in it.

    • Commenter avatarLog in to reply to the answers
  • What do you think of the answers? You can sign in to give your opinion on the answer.
  • 1 year ago

    Simply mow faster, so that you get all the grass cut within 45 minutes.

    • romans 8:1
      Lv 6
      1 year agoReport

      Simple idea, but it's not that simple.

    • Commenter avatarLog in to reply to the answers
  • 1 year ago

    It could be a dirty gas cap. There are little holes in it to let air into the tank as the gas flows out. If the holes are plugged up then eventually the gas will stop flowing out of the tank. A simple test for this is to take the gas cap off as soon as the engine starts sputtering. Of course, if it smooths out then you know the cap is the problem.

    You say it won't restart until it cools down. It could be that it takes awhile for air to seep back into the tank so gas can flow out again. The holes in the cap may be mostly plugged but not totally plugged.

    • Commenter avatarLog in to reply to the answers
  • C
    Lv 7
    1 year ago

    When did you last clean it? Check the air filter and give the carburetor a clean. While you're at it check the fuel tank for crud that may have gotten in.

    • Commenter avatarLog in to reply to the answers
Still have questions? Get answers by asking now.