Can a dusk to dawn light fixture be configured so the dusk to dawn feature does not work. ?
The light would only come on when the light switch is flipped
- LLv 41 month ago
If you don't want a light on at night - then do NOT even buy a light.
- 1 month ago
Probably can if you can open it disconnect the wires to it and connect them together bypassing the sensor.
- 1 month ago
This would depend on the particular model light that you have. Some have a switch to change to different modes. If yours does not offer this feature you could just cover the sensor with some duct tape so it will always sense that it is dark.
- Spock (rhp)Lv 71 month ago
the modern ones can, yes. there's a switch on the underside of the sensor
- What do you think of the answers? You can sign in to give your opinion on the answer.
- GFLv 51 month ago
Yes, rewire the light and bypass the sensor
- DroopyLv 51 month ago
Yes you just have to bypass the sensor. there 2 wires that go into the sensor. After you killed the breaker then test with your multimeter. you cut those 2 wires then splice them the light switch will control it.
- princess pounderLv 71 month ago
Put tape over the light sensor.
- PaulLv 61 month ago
Why not just cover the sensor and the light will always come on because it thinks it dark.
- EdwenaLv 71 month ago
Yes. The dusk to dawn gizmo is a switch. Wire around the switch. In the fixture, wire direct to the light with the incoming switch wire.
- 18 gibbs 20Lv 71 month ago
Configured? Most cannot.